Installation

PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY (for AWD): INSTALLATION

1. TEMPORARILY INSTALL FRONT PROPELLER SHAFT ASSEMBLY

(a) Align the matchmarks on the differential companion flange and front propeller shaft.

(b) Temporarily install the front propeller shaft with 6 new bolts and the 2 universal joint washers.

(c) Align the matchmarks on the transfer companion flange and front propeller shaft.

(d) Temporarily install the front propeller shaft with 6 new bolts and the 2 universal joint washers.

2. INSTALL REAR ENGINE MOUNTING MEMBER

(a) Set the rear No. 3 engine mounting insulator to the rear engine mounting member.

(b) Temporarily install the rear engine mounting member to the automatic transmission assembly with the 5 nuts.

Torque : 26 Nm (260 kgf-cm, 19 ft-lbf)

(d) Tighten the 5 nuts.

Torque : 38 Nm (387 kgf-cm, 28 ft-lbf)

3. TIGHTEN FRONT PROPELLER SHAFT ASSEMBLY

(a) Using a 6 mm socket hexagon wrench, tighten the front propeller shaft with the 6 bolts.

Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)

NOTICE:
Be careful not to damage the front propeller shaft.

(b) Using a 6 mm socket hexagon wrench, tighten the front propeller shaft with the 6 bolts.

Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)

NOTICE:
Be careful not to damage the front propeller shaft.

4. INSTALL FRONT EXHAUST PIPE ASSEMBLY

(a) Install the exhaust pipe Installation.

5. INSPECT FOR EXHAUST GAS LEAK