Removal

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR CLOSER SWITCH: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

(a) Using a screwdriver, detach the 3 claws.





HINT
Tape the screwdriver tip before use.

(b) Remove the 2 screws and assist grip.





2. REMOVE DOOR INSIDE HANDLE BEZEL

(a) Using a screwdriver, detach the 4 claws and remove the bezel.





HINT
Tape the screwdriver tip before use.

3. REMOVE SWITCH BEZEL (w/ Power Trunk Lid System)

(a) Using a screwdriver, detach the 2 claws and remove the bezel.





HINT
Tape the screwdriver tip before use.

4. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY

(a) Using a screwdriver, detach the 2 claws and remove the courtesy light.





HINT
Tape the screwdriver tip before use.

(b) Disconnect the connector.

5. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH

(a) Detach the 2 claws and remove the rear combination light service cover LH.

6. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

(a) Detach the 2 claws and remove the rear combination light service cover RH.

7. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

(a) Using a clip remover, remove the 3 clips and cover.





8. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

(a) Using a clip remover, remove the 3 clips and cover.





9. REMOVE BACK DOOR TRIM COVER

(a) Using a clip remover, remove the 4 clips.





(b) Remove the 10 clips and cover.

10. REMOVE LUGGAGE COMPARTMENT DOOR CLOSER SWITCH

(a) Disconnect the connector.





(b) Remove the 2 screws and door closer switch.