Removal

SEAT BELT: SHOULDER BELT ANCHORAGE SWITCH: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Disassembly

4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Disassembly

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly

6. REMOVE HEIGHT ADJUSTABLE ANCHOR SWITCH





(a) Using a screwdriver, detach the 2 claws and remove the switch.

HINT
Tape the screwdriver tip before use.