Installation

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Standard Body)

(a) Install the curtain shield airbag with the 2 clips and 8 new bolts.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)





NOTICE:
Do not twist the curtain shield airbag when installing it.

(b) Connect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Long Body)

(a) Install the curtain shield airbag with the 2 clips and 8 new bolts.

Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)





NOTICE:
Do not twist the curtain shield airbag when installing it.

(b) Connect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

3. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining assembly Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

CAUTION:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Pinout Values and Diagnostic Parameters.