Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU (w/o Advanced Parking Guidance System): INSTALLATION

1. INSTALL CLEARANCE WARNING ECU

(a) Install the clearance warning ECU to the suspension control ECU with the nut.





NOTICE:
* Avoid any impact to the clearance warning ECU.
* Do not drop the ECU. If it is dropped, replace it with a new one.

(b) Install the clearance warning ECU with the nut and bolt.





(c) Connect the each connectors.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL LOWER Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH





(a) Attach the 8 clips and claw to install the instrument panel finish panel end.

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some system need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

11. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.