Disassembly

1UR-FSE FUEL: FUEL PUMP: DISASSEMBLY

1. REMOVE FUEL SENDER GAUGE ASSEMBLY

(a) Disconnect the fuel sender gauge connector from the fuel suction plate.





(b) Press down on the sender gauge claw labeled A. Then slide the sender gauge upward.

NOTICE:
Do not touch the sender plate's resistance plate area or the contact area.

2. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

(a) Disconnect the fuel pump connector from the fuel suction plate.





(b) Using needle nose pliers, remove the E-ring.





(c) Remove the fuel suction plate and spring from the sub-tank.

3. REMOVE FUEL FILTER

(a) Detach the 2 claws and remove the filter from the sub-tank.





4. REMOVE JET PUMP





(a) Using a screwdriver with the tip taped, remove the jet pump from the sub-tank.

(b) Remove the O-ring from the jet pump.





5. REMOVE FUEL PUMP ASSEMBLY





(a) Disconnect the fuel pump connector from the fuel pump.

(b) Detach the 5 claws on the filter and remove the fuel pump from the fuel filter.





(c) Remove the fuel main valve from the fuel filter.

(d) Remove the 2 O-rings from the fuel main valve.

(e) Remove the O-ring and spacer from the fuel filter.