Installation

METER: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.





(b) Install the combination meter with the 4 screws.





2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Apply protective tape to the area shown in the illustration.





(b) Connect the connector.





(c) Attach the 2 clips to install the finish panel.

(d) Install the 2 clips.

3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation

4. INSTALL STEERING COLUMN COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter Repair Instruction - Customize Parameters.

6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

7. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.