Removal

1UR-FSE EXHAUST: EXHAUST MANIFOLD (for AWD): REMOVAL

1. REMOVE ENGINE AND TRANSMISSION

(a) Remove the engine and transmission Removal.

2. REMOVE FRONT FRAME ASSEMBLY Removal

3. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE Removal

4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 3 bolts and heat insulator.

5. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 3 bolts and heat insulator.

6. REMOVE FRONT ENGINE MOUNTING INSULATOR Removal

7. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH Removal

8. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH Removal

9. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

(a) Disconnect the air fuel ratio sensor connector.

(b) Remove the 8 nuts and exhaust manifold RH.

(b) Remove the 8 nuts and exhaust manifold LH.

(c) Remove the gasket.

11. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

SST : 09224-00010

12. REMOVE AIR FUEL RATIO SENSOR NO.2 (for Bank 2 Sensor 1)

(a) Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

SST : 09224-00010