Installation

1UR-FSE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

(a) Install a new gasket and the water inlet with thermostat with the 3 nuts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. CONNECT NO. 2 RADIATOR HOSE





HINT
The direction of the hose clamp is indicated in the illustration.

3. INSTALL RADIATOR RESERVOIR ASSEMBLY

(a) Install the radiator reservoir with the 2 bolts.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)





(b) Connect the 2 reservoir hoses.

HINT
The direction of the hose clamp is indicated in the illustration.

4. ADD ENGINE COOLANT Service and Repair

5. INSTALL NO. 1 AIR CLEANER INLET Installation

6. INSPECT FOR COOLANT LEAK Component Tests and General Diagnostics

7. INSTALL ENGINE ROOM SIDE COVER RH Installation

8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

9. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

10. INSTALL NO. 1 ENGINE UNDER COVER Service and Repair