Removal
SEAT: SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman): REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
4. REMOVE ROPE HOOK Removal
5. REMOVE ROPE HOOK ASSEMBLY Removal
6. REMOVE DECK TRIM SIDE BOARD RH Removal
7. REMOVE DECK TRIM SIDE BOARD LH Removal
8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal
9. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler) Removal
10. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal
11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal
12. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)
13. REMOVE TOOL BOX (w/o Spare Tire)
14. REMOVE REAR FLOOR FINISH PLATE Removal
15. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal
16. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH Removal
17. REMOVE SEAT VIBRATOR MODULE ASSEMBLY
(a) Disconnect the air hose connector.
(b) Disconnect the connector.
(c) Remove the 2 bolts and detach the claw. Then remove the module.