Installation

ENGINE HOOD / DOOR: LUGGAGE DOOR HINGE TORSION BAR: INSTALLATION

HINT
* The installation should be performed in the order of LH to RH.
* After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.

1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

(a) Install the torsion bar support.





2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH

(a) Set the tip of the luggage door hinge torsion bar LH in the installation hole in the center. The upper and lower holes are used for adjustment.





(b) Connect the luggage door hinge torsion bar LH to the body RH side.





(c) Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.





(d) Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and body LH side

SST : 09804-24010





3. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH

(a) Set the tip of the luggage door hinge torsion bar RH in the installation hole placed in the center part. Holes placed in the upper and lower parts are used for adjustment.





(b) Connect the luggage door hinge torsion bar RH to the body LH side.





(c) Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.





(d) Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and body RH side.

SST : 09804-24010





(e) Attach the 3 clips and install the luggage door wire.





4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

(a) Install the trim cover with the claw and 2 clips.





5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

(a) Install the trim cover with the claw and 2 clips.





6. INSTALL REAR FLOOR FINISH PLATE

(a) Attach the 4 clips to install the rear floor finish plate.





(b) Install the 3 clips.

7. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) Installation

8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

(a) w/o Rear Cooler:

(1) Install the trim cover with the 4 claws and 3 clips.





(b) w/ Rear Cooler:

(1) Install the trim cover with the 4 claws and 5 clips.





9. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)

(a) Attach the 2 trim hooks.

10. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

(a) Connect the connector.





(b) Install the courtesy light with the 2 claws.

11. INSTALL DECK TRIM SIDE BOARD LH

(a) Install the side board with the clip.





12. INSTALL DECK TRIM SIDE BOARD RH

(a) Install the side board with the clip.





13. INSTALL ROPE HOOK ASSEMBLY

(a) Install the 4 rope hooks with the 4 bolts.





14. INSTALL ROPE HOOK

(a) Install the 2 rope hooks.





15. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY





16. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

(a) Install the door hinge cover with the 3 clips.





17. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

(a) Install the door hinge cover with the 3 clips.