Installation

AUDIO / VISUAL: INSTRUMENT PANEL SPEAKER: INSTALLATION

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
* A bolt without a torque specification is shown in the standard bolt chart Repair Instruction - Initialization.

1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

(a) Connect the connector.

(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.

(c) Install the speaker with the 2 bolts.

NOTICE:
* Do not touch the cone part of the speaker.
* When installing the speaker to the instrument panel be careful that get caught the wires do not get caught between the parts.





2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY





(a) Attach the 2 clips and 7 claws to install the panel.

3. INSTALL FRONT PILLAR GARNISH LH

4. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY

(a) Connect the speaker connector.

(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.

(c) Install the speaker with the 2 bolts.

NOTICE:
* Do not touch the cone part of the speaker.
* When installing the speaker to the instrument panel be careful that get caught the wires do not get caught between the parts.





5. INSTALL NO. 1 SPEAKER HOLE COVER





(a) Attach the 4 clips to install the hole cover.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL COWL TOP VENTILATOR LOUVER RH Installation