Removal

AUDIO / VISUAL: RADIO RECEIVER: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:

* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

6. REMOVE NO. 3 BOX PANEL Removal

7. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY Removal

8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

(a) Remove the 2 bolts.

(b) Pull the radio receiver to detach the 4 clips, 2 claws and 3 ribs on the backside of the radio receiver.

(a) Detach the 2 clips and 2 claws and remove the panel

11. REMOVE NO. 2 RADIO BRACKET

(a) Remove the 4 bolts and bracket.

12. REMOVE NO. 1 RADIO BRACKET

(a) Remove the 4 bolts and bracket.