Dynamic Radar Cruise Control System

CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM: C1A10: Front Radar Sensor
C1A10 - Front Radar Sensor

DESCRIPTION

When the driving support ECU receives information that there is a malfunction in the front millimeter wave radar sensor, DTC C1A10 is output.





INSPECTION PROCEDURE

NOTICE:
When the front millimeter wave radar sensor is replaced with a new one, adjustment of the front sensor beam axis must be performed Adjustments.

PROCEDURE

1. REPLACE FRONT MILLIMETER WAVE RADAR SENSOR

(a) Replace the front millimeter wave radar sensor Removal.

NEXT -- Continue to next step.

2. ADJUST FRONT MILLIMETER WAVE RADAR SENSOR

(a) Adjust the front millimeter wave radar sensor Adjustments.

NEXT -- Continue to next step.

3. CHECK DRIVING SUPPORT ECU

(a) Enter the following menus: Powertrain / Radar Cruise / Trouble Code.

(b) Select "Clear" and clear the data.

(c) Recheck for DTC.

OK:

DTC C1A10 is not output.

NG -- REPLACE DRIVING SUPPORT ECU Removal

OK -- END