Removal

2UR-GSE FUEL: FUEL RELIEF VALVE: REMOVAL

1. PRECAUTION

CAUTION:
* Do not smoke or work near an open flame when handling the fuel system.
* Keep gasoline away from rubber or leather parts.
* Do not allow fuel to spray when removing the pipe between the high pressure side fuel pump assembly and the fuel injector assembly. The fuel in the pipe is highly pressurized.
2. DISCHARGE FUEL SYSTEM PRESSURE

(a) Discharge fuel system pressure Service Precautions.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

(a) Remove the intake air surge tank assembly Removal.

5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

6. REMOVE FUEL RELIEF VALVE ASSEMBLY

(a) Disconnect the No. 3 fuel hose from the fuel relief valve assembly.





(b) Using a 14 mm deep socket wrench, remove the fuel relief valve assembly and gasket from the No. 2 fuel delivery pipe.