Removal

AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: REMOVAL

1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

HINT
Refer to the procedure up to Remove Rear Suspension Member Sub-assembly Removal.

2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, remove the rear No. 1 differential mount cushion.

Text in Illustration

SST : 09316-12010

SST : 09570-24011

NOTICE:
* Do not bring SST into contact with the rear suspension member sub-assembly.
* Before using SST, apply grease to SST bolts.
* Set SST in the correct direction.
* Do not slant the bolts of SST.
* Tighten the 2 bolts of SST equally into the 2 holes of the rear No. 1 differential mount cushion.
* Do not reuse the rear No. 1 differential mount cushion.

3. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, remove the rear No. 2 differential mount cushion.

Text in Illustration