Removal

2GR-FSE FUEL: FUEL PRESSURE PULSATION DAMPER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCHARGE FUEL SYSTEM PRESSURE

HINT
Service Precautions.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY

(a) Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.





SST : 09612-24014

09617-24011