Removal

HEATING / AIR CONDITIONING: CONDENSER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE ENGINE ROOM SIDE COVER RH Removal

4. REMOVE V-BANK COVER SUB-ASSEMBLY

for 2GR-FSE: Removal

for 4GR-FSE: Removal

5. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

6. REMOVE INLET NO. 1 AIR CLEANER

for 2GR-FSE: Removal

for 4GR-FSE: Removal

7. REMOVE ENGINE UNDER COVER

8. REMOVE RADIATOR GRILLE PROTECTOR Removal

9. REMOVE FRONT BUMPER ASSEMBLY Removal

10. REMOVE RADIATOR SUPPORT OPENING COVER

for 2GR-FSE: Removal

for 4GR-FSE: Removal

11. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) Removal

12. REMOVE HOOD LOCK CONTROL CABLE COVER Removal

13. REMOVE HOOD LOCK NUT CAP Removal

14. DISCONNECT HOOD LOCK ASSEMBLY Removal

15. REMOVE UPPER RADIATOR SUPPORT

for 2GR-FSE: Removal

for 4GR-FSE: Removal

16. DISCONNECT LIQUID TUBE SUB-ASSEMBLY

(a) Remove the 2 bolts and disconnect the liquid tube sub-assembly from the cooler condenser assembly.





(b) Remove the O-ring from the liquid tube sub-assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

17. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

(a) Remove the 2 bolts and disconnect the discharge hose sub-assembly from the cooler condenser assembly.





(b) Remove the O-ring from the discharge hose sub-assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

18. REMOVE COOLER CONDENSER ASSEMBLY

(a) Remove the 4 bolts and cooler condenser assembly.