Removal

2GR-FSE COOLING: THERMOSTAT: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE INLET NO. 1 AIR CLEANER Removal

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE ENGINE UNDER COVER

5. DRAIN ENGINE COOLANT Service and Repair

6. SEPARATE NO. 2 RADIATOR HOSE

(a) Disconnect the No. 2 radiator hose from the inlet water with thermostat sub-assembly.





7. REMOVE INLET WATER WITH THERMOSTAT SUB-ASSEMBLY

(a) Remove the 3 nuts, inlet water with thermostat sub-assembly and gasket.