Clockspring Assembly / Spiral Cable: Testing and Inspection

SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSPECTION

1. INSPECT SPIRAL CABLE

(a) Visually check for defects with the spiral cable removed from the vehicle.

(1) The defects are as follows:

* Scratches on the spiral cable

* Small cracks the spiral cable

* Dents on the spiral cable

* Chips on the spiral cable

* Cracks or other damage to the connector

OK:

No defects are found.

HINT
If any of the defects is found, replace the spiral cable with a new one.

(b) Inspect the spiral cable.





Text in Illustration





(1) Measure the resistance according to the value(s) in the table below.

NOTICE:
To avoid breakage of the spiral cable, do not turn the spiral cable more than necessary.

Standard Resistance









If the value is not within the specified range, replace the spiral cable.