Removal

4GR-FSE FUEL: FUEL PUMP RESISTOR: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE ENGINE ROOM SIDE COVER Removal

5. REMOVE FUEL PUMP RESISTOR

(a) Disconnect the connector and clamp from the fuel pump resistor.





(b) Remove the 3 bolts and fuel pump resistor, and disconnect the ground wires.