Removal

4GR-FSE EMISSION CONTROL: CANISTER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

(a) Disconnect the 3 grommets and remove the 6 clips and rear No. 1 floor board sub-assembly.





3. REMOVE CHARCOAL CANISTER ASSEMBLY

(a) Disconnect the wire harness from the 2 clamps.





(b) Disconnect the 2 quick connectors, hose and connector.





(c) Remove the 4 nuts, 2 clips and charcoal canister assembly.