Removal

INTERIOR: REAR SUNSHADE ASSEMBLY: REMOVAL

1. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

2. REMOVE REAR SEAT HEADREST ASSEMBLY

3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

4. REMOVE REAR SEATBACK ASSEMBLY Removal

5. REMOVE REAR DOOR SCUFF PLATE LH Removal

6. REMOVE REAR DOOR SCUFF PLATE RH

7. REMOVE REAR SEAT SIDE GARNISH LH Removal

8. REMOVE REAR SEAT SIDE GARNISH RH

9. REMOVE ROOF SIDE INNER GARNISH LH Removal

10. REMOVE ROOF SIDE INNER GARNISH RH

11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Remove the bolt and separate the floor side of the rear seat 3 point type belt assembly LH.

HINT
Use the same procedures for the RH side and the LH side.

(b) Remove the bolt and separate the floor side of the rear seat inner with center belt assembly RH.

(d) Disengage the 2 claws and remove the rear seat shoulder belt covers.

HINT
Use the same procedure for the other 2 rear seat shoulder belt covers.

(e) Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly.

(f) Remove the package tray trim panel assembly.

12. REMOVE CENTER STOP LIGHT SET Removal

13. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Disengage the 3 clips and 5 claws, and remove the No. 2 package tray trim panel assembly.

14. REMOVE REAR WINDOW SHADE ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 4 bolts [A].

(c) Loosen the bolt [B] and remove the rear window shade assembly.

NOTICE:
Bolt [B] cannot be removed from the rear window shade assembly.

15. REMOVE REAR SUNSHADE RELAY

NOTICE:
When disassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

(a) Remove the screw.

(b) Disengage the 4 claws and remove the rear sunshade relay cover.

(c) Disconnect the connector.

(d) Remove the 2 screws and the rear sunshade relay.