Removal

UF1AE TRANSFER: TRANSFER VALVE BODY ASSEMBLY: REMOVAL

1. DRAIN AUTOMATIC TRANSMISSION FLUID Removal

2. REMOVE REAR NO. 1 FLOOR PANEL BRACE (for 4GR-FSE) Removal

3. REMOVE REAR NO. 1 FLOOR PANEL BRACE (for 2GR-FSE) Removal

4. REMOVE FRONT CENTER FLOOR BRACE (for 4GR-FSE) Removal

5. REMOVE FRONT CENTER FLOOR BRACE (for 2GR-FSE) Removal

6. DISCONNECT HEATED OXYGEN SENSOR (for 4GR-FSE) Removal

7. DISCONNECT HEATED OXYGEN SENSOR (for 2GR-FSE) Removal

8. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 4GR-FSE) Removal

9. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 2GR-FSE) Removal

10. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR (for 4GR-FSE) Removal

11. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR (for 2GR-FSE) Removal

12. SUPPORT AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY Removal

13. REMOVE ENGINE REAR MOUNTING MEMBER Removal

14. REMOVE TRANSFER DYNAMIC DAMPER Removal

15. REMOVE TRANSFER OIL PAN Removal

16. REMOVE TRANSFER VALVE BODY ASSEMBLY

(a) Remove the 4 bolts and the transfer upper valve body.





(b) Disconnect the transfer wire connector from the transfer control solenoid.

17. REMOVE TRANSFER CONTROL SOLENOID Disassembly