Glove Box Lamp: Testing and Inspection

LIGHTING: GLOVE BOX LIGHT: INSPECTION

1. INSPECT GLOVE BOX LIGHT

(a) Remove the glove box light.





(b) Measure the voltage according to the value(s) in the table below.

Standard voltage:





If the result is not as specified, repair or replace the wire harness or connector.

(c) Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.





(d) Check that the glove box light comes on.

OK:

Comes on

If the result is not as specified, replace the glove box light.