Installation

4GR-FSE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: INSTALLATION

1. INSTALL TIMING CHAIN CASE OIL SEAL

(a) Apply MP grease to the lip of a new oil seal.

NOTICE:
Keep the lip free of foreign matter.

(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.





SST : 09223-22010

SST : 09506-35010

NOTICE:
* Keep the lip free of foreign matter.
* Do not tap the oil seal at an angle.

2. INSTALL CRANKSHAFT PULLEY

(a) Install the pulley set key to the key groove.





(b) Align the pulley set key with the key groove of the pulley, and slide on the pulley.





(c) Using SST, install the crankshaft pulley bolt.

SST : 09213-70011

09213-70020

SST : 09330-00021

Torque : 250 Nm (2,550 kgf-cm, 184 ft-lbf)

3. INSTALL V-RIBBED BELT Installation

4. INSTALL RADIATOR ASSEMBLY

HINT
Installation.

5. INSPECT FOR OIL LEAK