Removal

AUDIO / VISUAL: AMPLIFIER ANTENNA: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE ROOF HEADLINING ASSEMBLY

Removal

HINT
Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY".

3. REMOVE AMPLIFIER ANTENNA ASSEMBLY

(a) Disconnect the connector.





(b) Disengage the clamp and remove the 2 nuts.

(c) Disengage the clip and remove the amplifier antenna assembly.

NOTICE:
If reusing the removed amplifier antenna assembly, do not touch the contact terminals.