Removal

PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The following procedure is for the LH side.

1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

HINT
Refer to the instructions for Removal of the parking brake control pedal assembly Removal.

2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the adjusting nut.

(b) Pull up the parking brake pedal claw.

(d) Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

3. REMOVE FRONT EXHAUST PIPE ASSEMBLY

HINT
Refer to the instructions for Removal of the front exhaust pipe assembly Removal.

4. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

(a) Remove the 3 nuts and front No. 2 floor heat insulator.

5. REMOVE REAR FLOOR SIDE MEMBER COVER LH Removal

6. REMOVE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY

(a) Separate the No. 3 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

(b) Separate the No. 2 parking brake cable assembly to remove the No. 1 parking brake pull rod sub-assembly.

HINT
Perform the same procedure as for the No. 3 parking brake cable assembly.

7. REMOVE PARKING BRAKE SHOE LEVER LH

HINT
Refer to the procedures up to "Remove Parking Brake Shoe Lever" Disassembly.

8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Disengage the clamp to separate the parking brake cable support clamp sub-assembly.

(b) Remove the bolt to separate the No. 3 parking brake cable assembly from the backing plate.

9. REMOVE PARKING BRAKE CABLE SUPPORT CLAMP SUB-ASSEMBLY

(a) Disengage the 2 claws to remove the parking brake cable support clamp sub-assembly from the No. 3 parking brake cable assembly.