Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT HEADREST ASSEMBLY

4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

5. REMOVE REAR SEATBACK ASSEMBLY Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR DOOR SCUFF PLATE RH Removal

8. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH Removal

9. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

10. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal

12. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal

13. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Removal

14. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Removal

15. REMOVE REAR SEAT SHOULDER BELT HOLE COVER Removal

16. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade) Removal

17. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) Removal

18. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Removal

19. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY

(a) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector as shown in the illustration.





(b) Remove the 2 bolts and the rear seat 3 point type belt assembly.