Canister Purge Solenoid: Testing and Inspection

2GR-FE EMISSION CONTROL: PURGE VALVE: INSPECTION

1. INSPECT EVAP VSV

(a) Check the VSV for an open circuit.





(1) Measure the resistance.

Standard resistance:





If the resistance is not as specified, replace the VSV assembly.

(b) Check VSV operation.

(1) Check that air does not flow from port E to port F.





(2) Apply battery positive voltage across the terminals.





(3) Check that air flows from port E to port F. If the result is not as specified, replace the purge VSV.

If the result is not as specified, replace the VSV assembly.