Removal

BRAKE CONTROL: SKID CONTROL BUZZER (w/ Dynamic Radar Cruise Control System): REMOVAL

1. PRECAUTION

2. REMOVE SHIFT LEVER KNOB Removal

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE Removal

4. REMOVE INSTRUMENT PANEL FINISH END PANEL LH Removal

5. REMOVE INSTRUMENT PANEL FINISH END PANEL RH Removal

6. REMOVE CONSOLE POCKET Removal

7. REMOVE CONSOLE BOX CARPET Removal

8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

9. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

10. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

11. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Removal

12. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Removal

13. REMOVE SKID CONTROL BUZZER

(a) Disconnect the skid control buzzer connector.





(b) Remove the clip and skid control buzzer assembly.