Removal

2GR-FE EXHAUST: EXHAUST PIPE: REMOVAL

1. REMOVE EXHAUST TAIL PIPE ASSEMBLY

(a) Remove the 4 nuts and 2 exhaust tail pipes.





(b) Remove the 2 gaskets from the exhaust center pipe assembly.

2. REMOVE EXHAUST CENTER PIPE ASSEMBLY

(a) Remove the 2 bolts, 2 nuts and exhaust center pipe assembly.





(b) Remove the gasket from the exhaust front pipe assembly.

3. REMOVE FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET

(a) Remove the 2 nuts and front support brackets.





4. REMOVE EXHAUST FRONT PIPE ASSEMBLY

(a) Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.

(b) Remove the 2 nuts from the exhaust front pipe (left bank exhaust manifold side).





(c) Remove the 2 bolts from the exhaust front pipe (right bank exhaust pipe manifold side).

(d) Remove the exhaust front pipe.

(e) Remove the 2 gaskets from the exhaust front pipe.

5. REMOVE HEATED OXYGEN SENSOR (for Bank 1) Removal

6. REMOVE HEATED OXYGEN SENSOR (for Bank 2) Removal

7. REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET

(a) Remove the 2 bolts and rear support bracket.