Removal

2GR-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: REMOVAL

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT
Removal.

2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

(a) Using SST, hold the crankshaft.





SST : 09213-70011

09213-70020

SST : 09330-00021

(b) Remove the 8 bolts, front spacer, drive plate and rear spacer.





3. REMOVE ENGINE REAR OIL SEAL

(a) Using a knife, cut off the oil seal lip.





(b) Using a screwdriver, pry out the oil seal.

NOTICE:
Be careful not to damage the crankshaft.

HINT
Tape the screwdriver tip before use.