Installation

2GR-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: INSTALLATION

1. INSTALL ENGINE REAR OIL SEAL

(a) Apply MP grease to a new oil seal lip.





(b) Using SST and a hammer, tap in the oil seal.

SST : 09223-15030

SST : 09950-70010

09951-07150

Oil seal tap in depth:

-0.5 to 0.5 mm (-0.020 to 0.020 in.)

2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

(a) Using SST, hold the crankshaft.





SST : 09213-70011

09213-70020

SST : 09330-00021

(b) Apply adhesive to 2 or 3 threads of the mounting bolt end.





Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

(c) Install the front spacer, drive plate and rear spacer on the crankshaft.





(d) Install and tighten the 8 mounting bolts uniformly in several steps.

Torque : 83 Nm (850 kgf-cm, 61 ft-lbf)

3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT
Installation.