Removal

BRAKE: BRAKE PEDAL: REMOVAL

1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

HINT
Refer to the procedures up to "REMOVE AIR CONDITIONING UNIT". Removal

2. REMOVE AFS ECU Removal

3. REMOVE BRAKE PEDAL RETURN SPRING

(a) Remove the brake pedal return spring.





4. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

(a) Remove the clip and push rod pin.





(b) Separate the brake master cylinder push rod clevis from the brake pedal sub-assembly.

5. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Disconnect the stop light switch connector and disengage the 2 clamps.





(b) Remove the 4 nuts, bolt, and the brake pedal support assembly.