Headlamp Washer Motor: Testing and Inspection

WIPER / WASHER: HEADLIGHT CLEANER MOTOR: INSPECTION

1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

HINT
The following check should be performed with the headlight cleaner motor and pump assembly installed to the washer jar.

(a) Fill the washer jar with washer fluid.

(b) Connect an auxiliary battery positive (+) lead to terminal 1 of the headlight cleaner motor and pump, and an auxiliary battery negative (-) lead to terminal 2.





(c) Check that washer fluid flows from the washer jar.

OK:

Washer fluid is pumped from the washer jar.

Text in Illustration





If the result is not as specified, replace the headlight cleaner motor and pump assembly.