Steering Mounted Controls Assembly: Testing and Inspection

STEERING COLUMN: STEERING PAD SWITCH: INSPECTION

1. INSPECT STEERING PAD SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





HINT
If the result is not as specified, replace the steering pad switch assembly.

Text in Illustration





(b) Check the illumination





(1) Disconnect the steering pad switch assembly connector.

(2) Check that the steering pad switch assembly illuminates according to the table below.

OK:





HINT
If the result is not as specified, replace the steering pad switch assembly.

Text in Illustration