Removal

2ZR-FXE COOLING: EXHAUST PIPE GAS CONTROL ACTUATOR: REMOVAL

1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Removal

2. DRAIN COOLANT (for Engine) Coolant (For Engine)

3. REMOVE EXHAUST PIPE GAS CONTROL ACTUATOR SUB-ASSEMBLY

(a) Remove the 5 bolts and exhaust pipe gas control actuator sub-assembly with the exhaust by-pass pipe installed.





NOTICE:
* When removing the exhaust pipe gas control actuator sub-assembly, use caution because coolant may spill out from the exhaust heat recirculation system.
* Do not apply any excessive force to the exhaust by-pass pipe when removing the exhaust pipe gas control actuator sub-assembly.

(b) Remove the exhaust by-pass pipe from the exhaust pipe gas control actuator sub-assembly.