Removal

2ZR-FXE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE REAR ENGINE UNDER COVER RH

3. REMOVE REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH Removal

4. REMOVE CRANKSHAFT PULLEY

(a) Using SST, hold the pulley in place and loosen the pulley bolt.





Text in Illustration





SST : 09213-58014

91551-80840

SST : 09330-00021

(b) Using SST, remove the crankshaft pulley and pulley bolt.





Text in Illustration





SST : 09950-50013

09951-05010

09952-05010

09953-05020

09954-05021

5. REMOVE TIMING CHAIN COVER OIL SEAL

(a) Using a knife, cut off the lip of the oil seal.





Text in Illustration





(b) Using a screwdriver with its tip wrapped with tape, pry out the oil seal.

NOTICE:
After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.