Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY

(a) w/ Intuitive Parking Assist System:

(1) Connect the connector.

(b) Engage the 4 claws and install the rear bumper assembly as shown in the illustration.





(c) Engage the 3 claws as shown in the illustration.





HINT
Use the same procedure for the RH side and LH side.

(d) Install the screw.

HINT
Use the same procedure for the RH side and LH side.

(e) Install the 2 screws and 8 clips.

2. INSTALL REAR BUMPER PIECE

(a) Engage the hook.

(b) Engage the 2 claws to install the rear bumper piece.





HINT
Use the same procedure for the RH side and LH side.