A960E Automatic Transmission

A960E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: ADJUSTMENT

1. ADJUST SHIFT LEVER POSITION

(a) Remove the nut and disconnect the shifting rod.





(b) Turn the control shaft lever of the park/neutral position switch counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.





Text in Illustration





(c) Move the shift lever to N and tighten the nut while lightly pushing the lever toward R.

NOTICE:
Do not push the shift lever too hard.

(d) After adjustment, check that the shift lever moves smoothly and the shift lever and gear operate correctly.

(e) Install the floor shift gear shifting rod sub-assembly with the nut.





Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)