Removal

HEATING / AIR CONDITIONING: HEATER GLOW PLUG: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY (for 2GR-FSE) Removal

2. REMOVE V-BANK COVER SUB-ASSEMBLY (for 4GR-FSE) Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE INLET NO. 1 AIR CLEANER (for 2GR-FSE) Removal

5. REMOVE INLET NO. 1 AIR CLEANER (for 4GR-FSE) Removal

6. REMOVE HEATER WATER OUTLET HOSE Removal

7. REMOVE HEATER WATER INLET HOSE Removal

8. REMOVE WATER BY-PASS GLOW PLUG

(a) Remove the 2 grommets, 2 nuts, 2 spring washers, and 2 washers, and disconnect the heater blower wires.





(b) Remove the water by-pass glow plugs.





NOTICE:
Prepare a container or a piece of cloth in case of coolant leakage.