Installation

OTHER SYSTEM: CLOCK: INSTALLATION

1. INSTALL CLOCK ASSEMBLY (w/o Navigation System)

(a) Connect the connector.





(b) Install the cover with the 9 screws.





(c) Engage the 5 claws.





(d) Install the install the integration control panel with 6 screws.





2. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System) Installation

3. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System) Installation

4. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System) Installation

5. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Installation

6. INSTALL CLOCK ASSEMBLY (w/ Navigation System for DVD)

(a) Check that the wire harness is in the position shown in the illustration.





(b) Engage the 2 clips and install the clock assembly.





7. INSTALL CLOCK ASSEMBLY (w/ Navigation System for HDD)

(a) Check that the wire harness is in the position shown in the illustration.





(b) Engage the 2 clips and install the clock assembly as shown in the illustration.





(c) Check that the wire harness is in the position shown in the illustration.





8. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System) Installation

9. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System) Installation

10. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System) Installation

11. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Installation

12. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

13. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

14. INSTALL CONSOLE BOX Installation

15. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Installation

16. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Installation

17. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

18. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Installation

19. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

20. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

21. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

22. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

23. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

24. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

25. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Installation

26. ADJUST CLOCK