Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL STEERING PAD ATTACHING SCREW

(a) Install the 2 steering pad attaching screws to the lower steering wheel boss cover.

2. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 2 pins and 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.

3. INSTALL CRUISE CONTROL SWITCH WIRE

4. INSTALL CRUISE CONTROL MAIN SWITCH Installation

5. INSTALL STEERING PAD SWITCH ASSEMBLY Installation

6. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

7. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

8. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.





Text in Illustration





(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

9. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

10. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.