Removal

1UR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ACCELERATOR PEDAL

(a) Disconnect the accelerator pedal sensor connector.





(b) Remove the 2 nuts and accelerator pedal.

NOTICE:
* Avoid physical shocks to the accelerator pedal.
* Do not disassemble the accelerator pedal assembly.