Canister Purge Solenoid: Testing and Inspection

1UR-FSE EMISSION CONTROL: PURGE VALVE: INSPECTION

1. INSPECT VACUUM SWITCHING VALVE ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:





If the result is not as specified, replace the vacuum switching valve assembly.

(b) Check operation of the vacuum switching valve assembly.

(1) Check that air does not flow from port E to port F.





(2) Apply battery voltage across terminals 1 and 2.





(3) Check that air flows from port E to port F.

If the result is not as specified, replace the vacuum switching valve assembly.