Installation

1UR-FSE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: INSTALLATION

1. INSTALL TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL

(a) Using SST, tap in a new oil seal until its surface is flush with the timing chain case edge.





SST : 09223-22010

SST : 09506-35010

NOTICE:
* Keep the lip free from foreign matter.
* Do not tap on the oil seal at an angle.

2. INSTALL CRANKSHAFT TIMING GEAR KEY

(a) Install the crankshaft timing gear key.





3. INSTALL CRANKSHAFT PULLEY

(a) Align the pulley set key with the key groove of the pulley, and slide on the pulley.





(b) Using SST, install the pulley bolt.

SST : 09213-54015

90119-08216

SST : 09330-00021

Torque : 300 Nm (3059 kgf-cm, 221 ft-lbf)

4. INSTALL V-RIBBED BELT Installation

5. INSTALL RADIATOR RESERVE TANK ASSEMBLY Installation

6. INSTALL NO. 1 AIR CLEANER INLET Installation

7. INSTALL COOL AIR INTAKE DUCT SEAL Installation

8. INSTALL ENGINE UNDER COVER