Installation

1UR-FSE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

(a) Install a new gasket and the water inlet sub-assembly with thermostat with the 3 nuts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. CONNECT NO. 2 RADIATOR HOSE Installation

3. ADD ENGINE COOLANT Service and Repair

4. INSPECT FOR COOLANT LEAK Testing and Inspection

5. INSTALL NO. 1 AIR CLEANER INLET Installation

6. INSTALL COOL AIR INTAKE DUCT SEAL Installation

7. INSTALL ENGINE UNDER COVER