Inspection

BRAKE: BRAKE MASTER CYLINDER (for 1UR-FSE): INSPECTION

1. INSPECT BRAKE MASTER CYLINDER SUB-ASSEMBLY

(a) Inspect the brake master cylinder sub-assembly. If any of the following occurs, replace the brake master cylinder sub-assembly with a new one :

The surface of the brake master cylinder sub-assembly is cracked, dented, or chipped off.

2. INSPECT BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY

(a) Inspect the brake stroke simulator cylinder sub-assembly. If any of the following occurs, replace the brake stroke simulator cylinder sub-assembly with a new one :

The surface of the brake stroke simulator cylinder sub-assembly is cracked, dented, or chipped off.