Rear Shock Absorber

SUSPENSION: REAR SHOCK ABSORBER: INSPECTION

1. INSPECT REAR SHOCK ABSORBER

(a) Extend and compress the rear shock absorber.





Standard:

When extending and compressing the rear shock absorber at a constant speed, it can be moved without any abnormal resistance or noise and load is constant through the entire stroke. It also extends at a constant speed after being compressed.

If there is any abnormality, replace the rear shock absorber with a new one.

NOTICE:
When disposing of the rear shock absorber, see DISPOSAL on page Disposal.

(b) Check that there is a difference in the damping force when the rod is positioned as shown. (for AVS)





NOTICE:
When disposing of the rear shock absorber, see DISPOSAL on page Disposal.